trangthienson
Newbie

About trangthienson

Biography:

1. How to control the forklift truck
Follow me: https://xenangthienson.com/
Note when choosing tires
Before making a decision to buy a forklift tire, you need to know the origin and characteristics of that tire line. In addition, the appropriate size for the forklift truck is also a factor that cannot be ignored. The tire you choose needs to meet the original surface-close criterion. From there, the using process avoids maximum risks occurring.

On the tire body, ensure the standard dimensions compared to the rim of the forklift. You should observe and carefully read the tire specifications specified by the manufacturer on the tire. You can check these to choose the right tire for the size.

How to choose a tire
Tires are often subjected to friction with the floor so they will quickly wear out, break down, and puncture. Therefore, you should choose tires carefully to ensure the running quality.

Standard with the type of vehicle design
This criterion should be followed and guaranteed to be correct. Because each forklift truck will have its own characteristics of payload and height. Therefore, the selected tire should be appropriate and proportionate. The parameters will be clearly printed on the rim. You should read this information carefully.

In addition, you also need to select tires according to the manufacturer. Each tire brand will have its own standards and characteristics. You will be consulted by a consultant to choose the most suitable tire from the brand.

Tire prices
Tire prices will be influenced by many factors: size, brand, characteristics, ... But in general, you should not buy tires that are too cheap or too high compared to the general market level. In general, the price of a tire fluctuates around 5 million VND. Old tires will be cheaper. However, you should not buy them for use because they can be highly risky.

Tire brand
You should only choose tires from the following brands:

Japan: Achi, Brdgestone
Thailand: Pio, Tokai, Kumakai
India: Ornet, Tungal
South Korea: Heung - ah, Nexen
Srilanka: Berounan
Casumina: Vietnam
* For low hand lift truck
Use a pallet that fits the cart, then push the cart into the available pallet. The sturdy grip of the pallet makes for smoother movement.
Perhaps with the line of hand lift trucks, the low hand forklift is the simplest, easiest to use.

* For the line of hand lift trucks
It is more complicated than the low lift forklift, but it is still very easy to use. This hand palletiser for narrow legs only can use single-sided pallets, while with wide-leg lines, any pallet can be used.
Like the low-lift forklift, the forklift is used to move goods like that, but one advantage of this model is that it is to lift the goods up high to put them on the shelf.
Use manual hydraulic jacks to lift goods. At the same time thanks to push hands to move goods.

* For electric forklift driver seat:
Make sure the surrounding area is safe before starting.
Raise the fork approximately 15 to 20 cm above the ground, and tilt the lift column completely back.
While depressing the brake / brake pedal, pull the shift lever forward or backward. Then, release the handbrake and release the brake / brake pedal while depressing the accelerator step by step.
If the forklift has a back and forth control pedal, depress on the right or left edge of the pedal.
The fast / slow speed of the forklift is adjusted by how much the accelerator or forward control pedal is depressed.
Always shift gears (switch back and forth lever) when the forklift has come to a complete stop to protect equipment and for safety

Location:

Hanoi